Accord L4-2.2L SOHC VTEC (1994)
7. Connect the SRS main harness ~8-P connector to the SRS unit, then push it into position until it clicks.
8. Put the carpet back in place.
9. Remove and properly store the short connectors, then reconnect the airbag connectors (and reinstall the access panel and the glove box).
10. Reconnect the battery positive cable, then the negative cable.
11. After installing the SRS unit, confirm proper system operation: Turn the ignition ON (II): the instrument panel SRS indicator light should come on
for about six seconds and then go off.
12. Enter the code number to restore radio operation.
