Accord L4-2.2L SOHC VTEC (1994)
Driver's Side:
-
Remove the short connector (RED) from the driver's airbag connector, then connect the airbag 3-P connector to the cable reel 3-P connector.
-
Attach the short connector (RED) to the access panel, then reinstall the panel on the steering wheel.
6. Connect the battery positive cable, then connect the negative cable.
7. After installing the airbag assembly, confirm proper system operation:
-
Turn the ignition ON (II): The instrument panel SRS indicator light should come on for about six seconds and then go off.
-
Make sure both horn buttons work.
-
Take a test drive, and make sure the cruise control switches work.
8. Enter the code number to restore radio operation.
