Accord L4-2.2L SOHC VTEC (1994)
9. Remove the upper and lower column covers.
10. Disconnect the 6-P connector between the cable reel and SRS main harness, then remove the connector holder from the steering column.
11. Remove the cable reel from the column.
CAUTION:
-
Before installing the steering wheel, the front wheels should be aligned straight ahead.
-
Be sure to install the harness wires so that they are not pinched or interfering with other car parts.
-
After reassembly, confirm that the wheels are still turned straight ahead and that the steering wheel spoke angle is correct (road test). If
minor spoke angle adjustment is necessary, do so only by adjustment of the tie-rods, not by removing and repositioning the steering
wheel.
