Accord L4-2.2L SOHC VTEC (1994)
20. Connect the cable reel 6-P connector to the SRS main harness, then install the knee bolster and dash- board lower cover.
21. Remove and properly store the short connectors (RED), then reconnect the airbag connectors (and reinstall the glove box).
22. Reconnect the battery positive cable, then the negative cable.
23. After installing the cable reel, confirm proper system operation:
-
Turn the ignition ON (II); the instrument panel SRS indicator light should come on for about six seconds and then go off.
-
Make sure both horn buttons work.
-
Make sure the headlight and wiper switches work.
-
Go for a test drive, and make sure the cruise control switches work.
-
Rotate the steering wheel counterclockwise to make sure the yellow gear tooth lines up with the slot on the cover.
24. Enter the code number to restore radio operation.
