Accord L4-2.2L SOHC VTEC (1994)
Impact Sensor: Testing and Inspection
CAUTION: Take extra care when painting or doing body work in the area below the dashboard. Avoid direct exposure of the sensors or
wiring to heat guns, welding, or spraying equipment.
WARNING:
-
Disconnect both the negative and positive battery cables.
-
Connect the short connectors before working below the dashboard near the dash sensors.
Sensor Inspection
-
After any degree of frontal body damage, inspect both dash sensors. Replace a sensor if it is dented, cracked, or deformed.
Sensor Inspection
-
Be sure the sensors are installed securely.