Accord L4-2.2L SOHC VTEC (1994)
Shift Fork: Testing and Inspection
Shift Fork Assembly
NOTE: The synchro sleeve and synchro hub should be replaced as a set.
1. Measure the clearance between each shift fork and its matching synchro sleeve.
2. If the clearance is more than the service limit, measure the thickness of the shift fork fingers.
-
If the thickness of the shift fork finger is not within the standard, replace the shift fork with a new one.
-
If the thickness of the shift fork finger is within the standard, replace the synchro sleeve with a new one.
3. Measure the clearance between the shift fork and the shift arm.