honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Windows - Clunk Noise from the Door Glass|Page 8056 > < Windows - Front Door Glass Comes Out of Run Channel|Page 8051
Page 1
background image

Window Regulator: Customer Interest
Windows - Clunk Noise from the Door Glass

Bulletin No.
94-024

Issue Date
OCT 16, 1995

Model
1994-96 
ACCORD 
COUPE

Applicable To
THRU VIN 1HGCD7...TA004813

File Under
BODY

"Clunk" Noise From the Door Glass
(Supersedes 94-024, dated August 29, 1994)

SYMPTOM

A "clunk" noise when you roll the window down.

PROBABLE CAUSE

Excessive movement of the door glass in the regulator mount. (The window mechanism is designed to allow some movement of the glass where the glass
holder mounts to the regulator.)

CORRECTIVE ACTION

[NEW] Replace the window glass mounting bolts. Adjust the door glass and the run channel.

1.

Remove the door trim panel as described in steps 1 thru 9 on page 20-4 of the Service Manual Supplement.

[NEW] 2.

Lower the window fully. Replace the glass mounting bolts at the window regulator (see PARTS INFORMATION). Apply DC-111 grease to
the 0-rings on the mounting bolts before installing them.

Windows - Clunk Noise from the Door Glass|Page 8056 > < Windows - Front Door Glass Comes Out of Run Channel|Page 8051