Accord L4-2.4L (2005)
![background image](/honda/accord/l4-2.4l/Page-2101001.png)
Alarm Module: Testing and Inspection
Control Unit Input Test
1. Before testing the keyless entry/security control functions, troubleshoot the multiplex integrated control system.
Multiplex Integrated Control Unit
2. Remove the left kick panel.
-
2-door
-
4-door
3. Disconnect the under-dash fuse/relay box connectors.
NOTE: All connectors are wire side of female terminals.
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.