Accord L4-2.4L (2005)
Radio Tuner: Description and Operation
Radio Theft Protection
On EX and EX-V6 models Your vehicle's audio system will disable itself if it is disconnected from electrical power for any reason. To make it work
again, you must enter a specific five-digit code using the preset bars or the TUNE knob. Because there are hundreds of number combinations possible
from the five-digit, making the system work without knowing the exact code is nearly impossible.
You should have received a card that lists your audio system code number and serial number. It is best to store this card in a safe place at home. In
addition, you should write the audio system's serial number in this Owner's Manual.
If you should happen to lose the card, you must obtain the code number from a Honda dealer. To do this, you will need the system's serial number.
If your vehicle's battery is disconnected or goes dead, the audio system will disable itself. If this happens, you will see "CODE" in the frequency display
the next time you turn on the system. Use the preset buttons to enter the five-digit code. The code is located on the radio code card included in your
Owner's Manual kit. When it is entered correctly, the radio will start playing.
If the code card is lost, a Honda dealer can access your code with the your radio's serial number. To access the serial number, turn the radio on. It must
display "CODE", then turn the radio off. Push the preset 1, preset 6, and power buttons at the same time, then quickly release.
You will have to store your favorite stations on each side of the preset bars (1 - 6) after the system begins working Your original settings were lost when
power was disconnected.