Accord L4-2.4L (2005)
![background image](/honda/accord/l4-2.4l/Page-2157005.png)
11. Reconnect the connector to the door multiplex control unit, and make these input tests at the connectors.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 12.
12. If all the input tests prove OK, and no DTCs were found during MICU troubleshooting (B-CAN system diagnosis test mode A), go to the B-CAN
system input and output index. If multiple failures are found on more than one control unit, replace the under-dash fuse/relay box (includes the
MICU). If input failures are related to a particular control unit, replace that control unit.