Accord L4-2.4L (2005)
![background image](/honda/accord/l4-2.4l/Page-2209002.png)
7. Remove the cable protector (A) from the latch protector (B) by releasing the hook (C).
8. Install the latch in the reverse order of removal, and note these items:
-
If equipped, make sure the actuator connector(s) are plugged in properly.
-
Make sure the door locks and the window operates properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.