Accord L4-2.4L (2005)
Hood Latch Release Cable: Service and Repair
Hood Opener Cable Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body and related parts.
1. Remove these items:
-
Front bumper, 2-door
-
Front grille, 4-door
-
Inner fender
-
Kick panel, 2-door, 4-door
2. Remove the bolts (A) then remove the radiator upper bracket (B).
3. Disconnect the hood opener cable (C) from the hood latch (D).
4. Move the radiator (E) as necessary. Using a clip remover, detach the clips (F), and remove the grommet (G) from the body, then remove the hood
opener cable from the vehicle. Take care not to bend the cable.
5. Install the cable in the reverse order of removal, and replace any damaged clips.