Accord L4-2.4L (2005)
1. Right side: Remove the trunk hook (C), the jack cover (D), and the jack (E).
2. Remove the hook bolts (F) and clips.
3. Remove the trim panels from the trunk compartment. Left side: Release the trunk lid opener cable (G) from the slit (H) in the trim panel.
4. Install the trim in the reverse order of removal, and note these items:
-
Check the clips for damage or stress-whitening, and replace them with new ones.
-
Push the clips into place securely.
Special Tools Required
KTC trim tool set SOJATP2014
'03-05 Models 4-door
NOTE:
-
Put on gloves to protect your hands.
-
Take care hot to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove the clip, then remove the spare tire lid (A).
2. Detach the clips, and release the hooks (A) by pulling the trunk rear trim panel (B) up, then remove it.