Accord L4-2.4L (2005)
Body Emblem: Service and Repair
Emblem/Sticker Replacement
2-door
NOTE: When removing the emblems/sticker, take care not to scratch the body.
1. Clean the body surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
2. Apply the emblems/sticker where shown. When installing the LEV/ULEV/PZEV ('05-06 models) sticker on the inside surface of the quarter glass,
align the sticker application tape with the edge of the black ceramic and the alignment mark on the quarter glass, then press the sticker into place,
and remove the application tape.
03-05 models 4-door
NOTE: When removing the emblems/sticker, take care not to scratch the body.
1. Clean the body surface with a sponge dampened in alcohol. After cleaning, keep oil, grease, and water from getting on the surface.