honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Interior Moulding / Trim|Service and Repair|Page 7395 > < Arm Rest|Service and Repair|Page 7391
Page 1
background image

Carpet: Service and Repair

Carpet Replacement

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.

NOTE:

-

Put on gloves to protect your hands.

-

Take care not to damage, wrinkle or twist the carpet.

-

Be careful not to damage the dashboard or other interior trim pieces.

1. With side curtain airbag: Make sure you have the anti-theft codes for the radio and the navigation system, then write down the frequencies for the

preset buttons.

2. With side curtain airbag: Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
3. Remove these items:

-

Front seats, both sides 

-

Rear seat cushion, 2-door, 4-door

-

Rear seat side bolsters, both sides, 4-door

-

Front door sill trim, both sides, 2-door, 4-door

-

Kick panels, both sides, 2-door, 4-door

-

Rear door sill trim, both sides, 4-door

-

B-pillar lower trim, 4-door without side curtain airbags, 4-door with side curtain airbags

-

Center console

-

Driver's dashboard center lower cover

-

Passenger's dashboard center lower cover

-

'04-06 models: Driver's dashboard undercover

-

'04-06 models: Passenger's dashboard lower cover

-

Parking brake lever

4. Remove the front seat belt lower anchor bolt, both sides ('03 model) or passenger's side ('04-06 models), 2-door, 4-door. 

5. Detach the clips, then remove the footrest (A).

Interior Moulding / Trim|Service and Repair|Page 7395 > < Arm Rest|Service and Repair|Page 7391