Accord L4-2.4L (2005)
![background image](/honda/accord/l4-2.4l/Page-2264001.png)
Console: Service and Repair
Center Console Removal/Installation
Center Console Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014
NOTE:
-
Take care not to scratch the front seat, dashboard, and related parts.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. M/T model: Remove the shift knob (A).
1. Lower the shift lever boot (B) to release the hooks (C) from the knob.
2
Remove the shift knob.
2. Detach the clips (A, B) by pulling the center console front panel (C) up. If equipped, disconnect the seat heater switch connectors (D).