Accord L4-2.4L (2005)
3. Remove the B-pillar upper trim (A).
1. Remove the clip (B) from the seat belt guide (C).
2. Pull out the trim by hand to detach the clips (D), and to release the hooks (E) in the numbered sequence.
4. Install the trim in the reverse order of removal, and note these items:
-
Check the clips for damage or stress-whitening, and replace them with new ones.
-
Push the clips into place securely.
-
Apply medium strength liquid thread lock to the front seat belt upper anchor bolt before reinstallation.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
-
When installing the side trim panel, make sure the seat belt is not pinched.
Special Tools Required
KTC trim tool set SOJATP2014
4-door-B-pillar - Without Side Curtain Airbags ('03-04 models)
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Front door sill trim
-
Rear door sill trim
-
Front door opening trim, as needed
-
Rear door opening trim, as needed
1. Remove these items:
-
Front door sill trim
-
Rear door sill trim
-
Front door opening trim, as needed
-
Rear door opening trim, as needed