Accord L4-2.4L (2005)
5. Install the trim in the reverse order of removal, and note these items:
-
Check the clips for damage or stress-whitening, and replace them with new ones.
-
If the side curtain airbag has deployed, replace the B-pillar upper trim with a new one.
-
To prevent the side curtain airbag from accidentally deploying, removed trim pieces should be checked for these kinds of damage:
-
Any cracks or deformations in the B-pillar upper trim (A) and the upper hooks (B), and any press-whitenings in the upper part of the trim
-
Any cracks or deformations in the B-pillar lower trim (C), and any breakages in the part (D) fitted with the B-pillar upper trim.
-
Any cracks or press-whitenings in the clip seating surfaces (E)
-
Check the clips for damage or stress-whitening, and if necessary, replace them with new ones.
-
Make sure the top of the trim overlaps with the headliner correctly.
-
Make sure the trim hooks are installed into the holes in the side curtain airbag B-pillar bracket securely.
-
Push the clips into place securely.
-
Apply medium strength liquid thread lock to the front seat belt upper anchor bolt before reinstallation.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
Special Tools Required
KTC trim tool set SOJATP2014
2-door-C-pillar - With Side Curtain Airbags ('04-06 models)
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove the rear seat cushion.
2. Remove the rear seat belt lower anchor bolt.