honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Drain Channel Replacement|Page 7735 > < Drain Channel Replacement|Page 7733
Page 2
background image

3. 4-door: Remove the moonroof frame (A). Put on gloves to protect your hands.

1. Disconnect the motor connector (B), open/close-tilt/close switch connector (C), and the drain tubes (D), and remove the moonroof relays (E).
2. Remove the interior harness (F) by detaching the harness clips (G) and removing the tapes (H).
3. With an assistant holding the frame, remove the bolts starting at the rear, and release the rear hooks (I) by moving the frame forward, then

remove the frame.

4. With the help of an assistant, carefully remove the frame through the front door opening. Take care not to damage the interior trim, body, or 

seat covers.

4. To remove a front drain valve (A) from the body, remove the kick panel, left or right, 2-door, 4-door. Tie a string to the top end of the drain tube,

then pull the front drain tube (B) down out of the front pillar.

Drain Channel Replacement|Page 7735 > < Drain Channel Replacement|Page 7733