Accord L4-2.4L (2005)
8. Pull back the edge of the seat-back cover (A) all the way around, and release the hooks (B) of the horizontal wires (C) from the vertical wires (D)
on the pad (4-door), and remove the clips (E), then remove the seat-back cover.
9. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the fasteners,
hook strips, and clips.
-
Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.