Accord L4-2.4L (2005)
12. Install the caliper. Install the flange bolts (F), and tighten it to the specified torque while holding the pin A and pin B with a wrench. Be careful not
to damage the pin boots.
13. Press the brake pedal several times to make sure the brakes work.
NOTE: Engagement of the brake may require a greater pedal stroke immediately after the brake pads have been replaced as a set. Several
applications of the brake pedal will restore the normal pedal stroke.
14. After installation, check for leaks at hose and line joints or connections, and retighten if necessary. Then test-drive the vehicle.