Accord L4-2.4L (2005)
7. Remove the U-clip (A), and wave washer (B), and separate the parking brake lever (C) from the brake shoe (D).
Reassembly
1. Apply a thin coat of 44 MA assembly paste onto the sliding surfaces as illustrated. Wipe off any excess assembly paste. Do not get assembly paste
on the brake lining material.
2. Install the parking brake lever (A) to the rearward brake shoe (B), and secure it with the wave washer (C), and a new U-clip (D). Pinch the U-clip
securely to prevent it from coming off.
NOTE: Install the wave washer with its convex side facing outside.
3. Connect the parking brake cable to the rearward brake shoe.
4. Install the self-adjuster lever (C) and self-adjuster spring (D) on the front side brake shoe (E).