Accord L4-2.4L (2005)
8. Remove the rod seal (F) from the master cylinder.
9. Install the master cylinder in the reverse order of removal, and note these items:
^
Replace all the rubber parts with new ones whenever the master cylinder is removed.
^
Use a new rod seal on reassembly.
^
Coat the inner bore lip and outer circumference of the new rod seal with the recommended seal grease in the master cylinder set.
^
Install the rod seal onto the master cylinder with its grooved side (G) toward the master cylinder.
^
Check the brake pedal height and free play after installing the master cylinder, and adjust it if necessary.
10. Bleed system.
11. Spin the wheels to check for brake drag.
