Accord L4-2.4L (2005)
Variable Valve Timing Actuator: Testing and Inspection
VDC Oil Control Solenoid Valve Removal/Test/Installation
VTC Oil Control Solenoid Valve Removal/Test/Installation
1. Disconnect the VTC oil control solenoid valve connector (A).
2. Remove the bolt (B) and the VTC oil control solenoid valve (C).
3. Check the VTC oil control solenoid valve for sticking and the solenoid valve filter for clogging. If the valve is stuck or clogged, replace the VTC
oil control solenoid valve.
4. Check clearance between the port (advance side) and the valve. Make sure the valve (A) closes fully.
5. Connect the battery positive terminal to VTC oil control solenoid valve 2P connector terminal No.2.