Accord L4-2.4L (2005)
7. Rotate the rings in their grooves to make sure they do not bind.
8. Position the ring end gaps as shown:
9. After installing a new set of rings, measure the ring-to-groove clearances:
Top Ring Clearance
Standard (New): 0.045 - 0.070 mm (0.0018 - 0.0028 inch)
Service Limit: 0.13 mm (0.005 inch)
Second Ring Clearance
Standard (New): 0.050 - 0.075 mm (0.0020 - 0.0030 inch)
Service Limit: 0.13 mm (0.005 inch)