Accord L4-2.4L (2005)
Valve: Service and Repair
Valve, Spring, and Valve Seal Removal
Valve, Spring, and Valve Seal Removal
Special Tools Required
Valve spring compressor attachment 07757-PJ1010A
Identify the valves and valve springs as they are removed so that each item can be reinstalled in its original position.
1. Remove the cylinder head.
2. Using an appropriate-sized socket (A) and plastic mallet (B), lightly tap the valve retainer to loosen the valve cotters.
3. Install the spring compressor. Compress the spring, and remove the valve cotters.
4. Remove the special tool, then remove the valve retainer and valve spring.
5. Install the valve guide seal remover.
6. Remove the valve seal.