Accord L4-2.4L (2005)
NOTE: Do not install components if too much time has passed after applying the liquid gasket (for P/N 08718-0002, no more than 4 minutes,
for all others, no more than 5 minutes). Instead, remove the old residue and reapply the liquid gasket.
14. Apply liquid gasket to the engine block upper surface contact areas (A) on the chain case and lower block upper surface contact areas (B) on the
chain case.
15. Apply liquid gasket, P/N 08718-0001, 08718-0002, or 08718-0009, evenly to the oil pan mating surface of the chain case.
NOTE: Do not install components if too much time has passed after applying the liquid gasket (for P/N 08718-0002, no more than 4 minutes,
for all others, no more than 5 minutes). Instead, remove the old residue and reapply the liquid gasket.
16. Install the new O-ring (A) on the chain case. Set the edge of the chain case (B) to the edge of the oil pan (C), then install the chain case on the
engine block (D). Wipe off all of the excess liquid gasket on the oil pan and chain case mating area.
NOTE:
^
When installing the chain case, do not slide the bottom surface on the oil pan mounting surface.
^
Wait at least 30 minutes before filling the engine with oil.
^
Do not run the engine within 3 hours after installing the chain case.