Accord L4-2.4L (2005)
21. Install the A/C compressor.
22. Install the splash shield.
23. Install the alternator.
24. Check the quick connector (A), and set ring (B) for cracks or damage. If the connector and/or set ring are cracked or damaged, replace the
connector.
25. Make sure the set ring is in place inside the quick connector. If the set ring is off the connector, replace the quick connector.
26. Replace the Or-ring (C) In the quick connector.
27. Check the lock (D). If the lock is damaged or deformed, replace it. When installing the new lock on the connector, press it straight down along the
groove.
28. Clean the connecting surface of the thermostat cover (E), then apply clean engine coolant around the connecting surface.
29. Push down the lock (A), then push the quick connector (B) onto the thermostat cover until you here it click.
30. After assembly, wait at least 30 minutes before filling the engine with coolant or oil.