Accord L4-2.4L (2005)
3. If the passenger's air mix control motor did not run in step 2, remove it, then check the passenger's air mix control linkage and door for smooth
movement.
-
If the linkage and door move smoothly, replace the passenger's air mix control motor.
-
If the linkage or door sticks or binds, repair them as needed.
-
If the passenger's air mix control motor runs smoothly, go to step 4.
4. Measure the resistance between the No.4 and No.5 terminals. It should be between 4.2 to 7.8 kOhms.
5. Reconnect the passenger's air mix control motor 5P connector, then turn the ignition switch ON (II).
6. Using the backprobe set, measure the voltage between the No.3 and No.5 terminals.
Max Cool - about 1.0 V
Max Hot - about 4.0 V
7. If either the resistance or voltage readings are not as specified, replace the passenger's air mix control motor.