Accord L4-2.4L (2005)
8. Disconnect audio-HVAC display panel 22P connector.
9. Turn the ignition switch ON (II).
10. Measure the voltage between the No.1 terminal of audio-HVAC display panel 22P connector and body ground.
Is there 5 V or more?
YES - Go to step 11.
NO - Repair open in the wire between the audio-HVAC display panel and the A/C pressure switch.
11. Turn the ignition switch OFF.
12. Measure the resistance between the No.9 and No.10 terminals of the audio-HVAC display panel 22P connector.
Is the resistance less than 24 kOhms?
YES - Check for loose wires or poor connections at audio-HVAC display panel 22P connector and at the A/C pressure switch 2P connector. If the
connections are good, substitute a known-good audio-HVAC display panel, and recheck. If the symptom/indication goes away, replace the original
audio-HVAC display panel.
NO - Repair cause of high resistance in the evaporator temperature circuit.
13. Measure the voltage between the No.2 terminal of under-hood fuse/relay box connector H (14P) and body ground with the under-hood fuse/relay
box connectors connected.
Is there 5 V or more?
YES - Repair open in the wire between the under-hood fuse/relay box and the A/C pressure switch.