Accord L4-2.4L (2005)
3. Remove the snap ring (A) and the splash guard (B) from the knuckle (C).
4. Check the front knuckle ring (A) for damage or deformation, and replace it if necessary.
5. Press the wheel bearing (A) out of the knuckle (B) using the special tool and a press.
6. Wash the knuckle and hub thoroughly in high flash point solvent before reassembly.
7. Press a new wheel bearing (A) into the knuckle (B) using the old bearing (C), a steel plate (D), the special tool, and a press.
NOTE: