Accord L4-2.4L (2005)
ECM/PCM Inputs And Outputs At Connector E (31P) Part 2
How to Troubleshoot Circuits At the ECM/PCM
How to Troubleshoot Circuits at the ECM/PCM
Special Tools Required
-
Digital multimeter KS-AHM-32-003 (1) or a commercially available digital multimeter
-
Backprobe set 07SAZ-001000A (2)
1. Connect the backprobe adapters (A) to the stacking patch cords (B), and connect the cords to a digital multimeter.
2. Using the wire insulation as a guide for the contoured tip of the backprobe adapter, gently slide the tip into the connector from the wire side until it
touches the end of the wire terminal.