Accord L4-2.4L (2005)
Information Bus: Description and Operation
System Description
System Description
Body Controller Area Network (B-CAN) and Fast Controller Area Network (F-CAN)
Fast controller Area Network (F-CAN) and Body Controller Area Network (B-CAN) share information between multiple Electronic Control Units
(ECUs). B-CAN communication moves at a slower speed for convenience related items, and for other functions. F-CAN information moves at a faster
speed for "real time" functions such as fuel and emissions data. To allow both systems to share information, the Gauge Control Module translates
information from B-CAN to F-CAN and from F-CAN to B-CAN.
The ECUs on the B-CAN and F-CAN transmit and receive information in the form of structured messages that may be received by several different
ECUs on the network at one time. These message are transmitted and received across a communication circuit that consists of a single wire that is shared
by all the ECUs on the circuit. Since messages on the F-CAN network are typically of higher importance, a second wire is used for communication
circuit integrity monitoring. A backup circuit is also added to the headlight and wiper circuits on the B-CAN network in the event of a network wire or
ECU failure that would effect the operation of the system.
Messages are transmitted by an ECU (that monitors an input) over the communication circuit. ECUs that use the message (information related to that
input) are the receivers. For example, the Combination Switch Control Unit monitors the wiper switch. When the wiper switch is placed in the low speed
position, the Combination Switch Control Unit transmits that message on the communication circuit. The Relay Control Module receives the message
