Accord L4-2.4L (2005)
5. To prevent damage and keep foreign matter out, cover the disconnected connector and line ends with plastic bags (A).
NOTE:
-
The retainer cannot be reused once it has been removed from the line. Replace the retainer when:
-
replacing the fuel rail.
-
replacing the fuel feed line.
-
replacing the fuel pump.
-
replacing the fuel filter.
-
replacing the fuel gauge sending unit.
-
it has been removed from the line.
-
it is damaged.
Fuel Line/Quick-Connect Fitting Installation
1. Check the contact area (A) of the line (B) for dirt or damage, and clean it if needed.
2. Insert a new retainer (A) into the connector (B) if the retainer is damaged, or after:
-
replacing the fuel rail.
-
replacing the fuel feed line.
-
replacing the fuel pump.
-
replacing the fuel filter.
-
replacing the fuel gauge sending unit
-
removing the retainer from the line.