Accord L4-2.4L (2005)
![background image](/honda/accord/l4-2.4l/Page-1218001.png)
Throttle Cable/Linkage: Service and Repair
Throttle Cable Removal/Installation
1. Remove the engine cover.
2. Fully open the throttle valve, then remove the throttle cable (A) from the throttle link (B).
3. Remove the cable housing (C) from the cable bracket (D).
4. Remove the throttle cable (A) from the accelerator pedal (B).
5. Install the cable in the reverse order of removal.
6. Start the engine. Hold the engine at 3,000 rpm without load (in Park or neutral) until the radiator fan comes on, then let it idle.
7. Hold the cable, removing all slack from it.
8. Set the cable (A) on the bracket (B). Turn the adjusting nut (C) so that its free play is 0 mm.