Accord L4-2.4L (2005)
Fuel Pressure: Testing and Inspection
Fuel Pressure Test
Special Tools Required
-
Fuel pressure gauge 07406-004000A
-
Fuel pressure gauge attachment set 07AAJ-S6MA150
1. Relieve the fuel pressure.
2. Disconnect the quick-connect fitting. Attach the fuel pressure gauge set and the fuel pressure gauge.
3. Start the engine, and let it idle.
-
If the engine starts, go to step 5.
-
If the engine does not start, go to step 4.
4. Check to see if the fuel pump is running: listen to the fuel filler port with the fuel fill cap removed. The fuel pump should run for 2 seconds when
the ignition switch is first turned on.
-
If the pump runs, go to step 5.
-
If the pump does not run, do the fuel pump circuit troubleshooting.
5. Read the fuel pressure gauge. The pressure should be:
SULEV model: 320 - 370 kPa (3.3 - 3.8 kgf/sq.cm, 47 - 54 psi)
Non-SULEV model: 330 - 380 kPa (3.4 - 3.9 kgf/sq.cm, 48 - 55 psi)
-
If the pressure is OK, the test is complete.
-
If the pressure is Out of specification, replace the fuel pressure regulator and the fuel filter, then recheck the fuel pressure.