Accord L4-2.4L (2005)
Air Bag: Service and Repair
Driver's Airbag
Driver's Airbag Replacement
Removal
1. Disconnect the battery negative cable, and wait at least 3 minutes before beginning work.
2. Remove the access panel (A) from the steering wheel, then disconnect the driver's airbag 4P connector (B) from the cable reel.
3. Remove the two Torx bolts (A) using a Torx T30 bit.
4. Disconnect the horn switch connector (1P), then remove the driver's airbag (B).
Installation
1. Connect the horn switch connector (1P) (A) to the driver's airbag.
2. Place the new driver's airbag (B) in the steering wheel, and secure it with new Torx bolts (C).