Accord L4-2.4L (2005)
4-door
3. Remove the front passenger's weight sensors from the seat riser.
Installation
NOTE: Be sure to install the harness wires so they are not pinched or interfering with other parts.
1. Place the new front passenger's weight sensors on the seat riser.
2. Install the seat onto the weight sensors.
3. Reinstall the seat assembly.
4. Reconnect the battery negative cable.
5. Calibrate the front passenger's weight sensor unit.
6. After installing the front passenger's weight sensors, confirm proper system operation: Turn the ignition switch ON (II): the SRS indicator should
come on for about 6 seconds and then go off.