Accord L4-2.4L (2005)
Door Lock Cylinder Switch: Testing and Inspection
Door Key Cylinder Switch Test
1. Remove the driver's door panel.
-
2-door
-
4-door
2. Disconnect the 3P connector from the key cylinder switch.
3. Check for continuity between the terminals.
-
There should be continuity between the No. 2 and No. 3 terminals when the door key cylinder switch is in LOCK position.
-
There should be no continuity between the No. 2 and No. 3 terminals when the door key cylinder switch is in the neutral or UNLOCK position.
-
There should be continuity between the No. 1 and No. 2 terminals when the door key cylinder switch is in UNLOCK position.
-
There should be no continuity between the No. 1 and No. 2 terminals when the door key cylinder switch is in the neutral or LOCK position.
4. If the continuity is not as specified, replace the door key cylinder assembly.
-
2-door
-
4-door