Accord L4-2.4L (2005)
11. Drive out the front bearing with a brass drift and hammer.
12. With a hammer and special tools, install a new front bearing in the drive end housing.
Alternator Brush Inspection
13. Measure the length of both brushes (A) with vernier calipers (B).
-
It either brush is shorter than the service limit, replace the brush holder assembly.
-
If brush length is OK, go to step 14.
Alternator Brush Length
Standard (New): 10.5 mm (0.41 in.)
Service Limit: 1.5 mm (0.06 in.)
Rotor Slip Ring Test