Accord L4-2.4L (2005)
14. Measure the brush length (A). If it is shorter than the service limit, replace the brush holder assembly.
Brush Length
Standard (New): 7.7 - 8.0 mm (0.30 - 0.31 in.)
Service Limit: 0.9 mm (0.04 in.)
Starter Brush Holder Test
15. Check that there is no continuity between the (+) brush (A) and (-) brush (B). If there is continuity, replace the brush holder assembly.
Planetary Gear Inspection
16. Check the planetary gears (A) and ring gear (B). Replace the them if they are worn or damaged.
Overrunning Clutch Inspection
17. Slide the overrunning clutch along the shaft. Replace it, if it does not slide smoothly.