Accord L4-2.4L (2005)
15. Place several shop towels under the line connections, and cover the gearbox mounting part to protect it from the power steering fluid. Loosen the
flare nut (A), and disconnect the feed line (B).
16. Loosen the flare nut (C), and disconnect the return line (D).
17. After disconnecting the lines, plug or seal them with a piece of tape or equivalent to prevent foreign materials from entering.
NOTE: Do not loosen the cylinder line A and B between the valve body unit and the cylinder.
18. Attach the subframe adaptor to the front suspension subframe (A) by hanging the hook of the subframe adaptor over the front of the subframe, then
tighten the subframe adaptor screw.
19. Raise the jack (B) and line up the slots in the arms with the bolt holes on the corner of the jack base, then attach them with bolts securely.
20. Remove the front suspension subframe right middle mount bolts (A).
21. Remove the front suspension subframe left middle mount (A).