Accord L4-2.4L (2005)
26. Move the steering gearbox toward the front, and remove the pinion shaft grommet (A) from the top of the valve body unit.
27. Apply vinyl tape (B) to the splines on the pinion shaft.
28. Apply vinyl tape or equivalent material (A) to the brake lines (B) to protect them from the pinion shaft.
29. Move the steering gearbox to the driver's side, and rotate it so the pinion shaft points toward the front of the vehicle.
30. Carefully move the steering gearbox as an assembly toward the driver's side of the vehicle until the pinion shaft clears the wheelwell opening. Be
careful not to damage the brake lines with the pinion shaft.