Accord L4-2.4L (2005)
8. Position the cutout (A) on the mounting cushion (B) as shown, and install it on the cylinder of the gearbox securely.
9. Install the gearbox mounting bracket (C) over the mounting cushion, and loosely install the two flange bolts.
10. Install the steering stiffener plate (A) and gearbox mounting bolts on the left side of the gearbox, then tighten them to the specified torque.
11. Tighten the flange bolts on the right side of the gearbox to specified torque alternately in two or more steps.
12. Loosely connect the return line and feed line by hand.
13. Install the feed line holder (A) and return hose (B) on the gearbox mounting bracket (C)
14. Install the feed line holder (D) on the front suspension subframe. Make sure that there is no interference between the feed and return lines and any
other parts.