Accord L4-2.4L (2005)
53. Coat the sliding surface of the special tool (A) and new cylinder end seal (B) with power steering fluid. Place the seal on the special tool with its
grooved side (C) facing opposite the special tool.
54. Coat the surface of the steering rack (A) with power steering fluid.
55. Install the cylinder end seal (B) onto the steering rack with its grooved side (C) toward the piston (D).
56. Separate the cylinder end seal from the special tool, then remove the special tool.
57. Install the new backup ring (A) on the steering rack, then place the backup ring and cylinder end seal (B) against the piston (C).
58. Apply multipurpose grease to the steering rack teeth, then insert the steering rack into the gearbox housing. Be careful not to damage the inner
surface of the cylinder wall with the rack edges. At,