Accord L4-2.4L (2005)
13. Place a transmission jack under the transmission, and remove the transmission lower mount nuts.
14. Lift the transmission up to create clearance between the transmission and front subframe with the jack.
15. Remove the ATF dipstick, and remove the bolts securing the ATF cooler inlet line brackets (A) and ATF dipstick guide pipe (B) from the
transmission hanger (C).
16. Remove the harness clamp (D), then remove the ATF dipstick guide pipe.
17. Disconnect the shift solenoid harness connector.
18. Remove the shift solenoid valve cover (A), dowel pins (B), and gasket (C).