Accord L4-2.4L (2005)
8. Verify that the shift cable end (A) is properly installed on the mounting stud (B).
9. If improperly installed, remove the shift cable from the bracket base, and reinstall the shift cable. Do not install the shift cable end on the mounting
stud while the shift cable is on the bracket base.
10. Install and tighten the nut.
11. Remove the 6.0 mm (0.24 inch) pin that was installed to hold the shift lever.
12. Move the shift lever to each position, and verify that the A/T gear position indicator follows the transmission range switch.
13. Push the shift lock release, and verify that the shift lever releases.
14. Reinstall the center console.