Accord L4-2.4L (2005)
^
Install the air cleaner assembly.
^
Install the battery. Clean the battery posts and cable terminals. Connect the positive cable to the battery first, then connect the negative cable,
and apply multipurpose grease to prevent corrosion.
^
Enter the anti-theft codes for the audio unit and the navigation system, then enter the audio presets, and set the clock.
15. Make sure the hose clamps (A) are positioned on the master cylinder (B) and reservoir (C) as shown.
16. To prevent the retaining clip (A) from coming off, pry apart the tip of the retaining clip (B) with a screwdriver.
17. Bleed the clutch hydraulic system.
NOTE: Reservoir filling is covered in the bleeding procedure.
18. Make sure the fluid level in the reservoir is at the MAX (upper) level line.
19. Adjust the clutch pedal, clutch pedal position switch, and clutch interlock switch.
20. Check the clutch operation and check for leaks.
21. Test-drive the vehicle.