Accord L4-2.4L (2005)
5. Adjust the position of the new dynamic damper to the figure.
6. Install the dynamic damper band.
7. Install the inboard joint.
Intermediate Shaft Removal
Intermediate Shaft Removal
M/T model
1. Drain the transmission fluid. Reinstall the drain plug using a new washer.
2. Remove the right driveshaft.
3. Remove the flange bolt (A) and two dowel bolts (B).
4. Remove the intermediate shaft (A) from the differential. Hold the intermediate shaft horizontal until it is clear of the differential to prevent damage
to the differential oil seal (B).
Intermediate Shaft Disassembly
Intermediate Shaft Disassembly
Special Tools Required
^
Oil seal driver 07947-SB00100
^
Half shaft base 07NAF-SR30101 or 07NAF-SR34101