Accord L4-2.4L (2005)
Power Window Switch: Testing and Inspection
Master Switch Input Test
Master Switch Input Test
1. Before testing the power windows, troubleshoot the multiplex integrated control system using B-CAN System Diagnosis Test Mode A.
2. Remove the driver's door switch trim.
-
2-door
-
4-door
3. Disconnect the 23P connector (A) from the power window switch (B).
4. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.